How are cure times determined?
Cure times vary depending on a wide variety of factors. Please review the documents below and read our blog for more helpful information.
Solvent Cement Cure Charts
Solvent Cement Instructions
< Cements
Oatey® 2000 Series PVC Plumb-Tite™
Key Features & Benefits
- 32 oz. medium body blue PVC cement
- Meets ASTM Standard D2564
- Please refer to the Oatey Limited Warranty for warranty details
- Recommended for potable water, pressure pipe and DWV applications
- Formulated for wet conditions and/or quick pressurization and fast installation
- For use on use on all schedules and classes of flexible and rigid PVC pipe and fittings up to 6 in. diameter with interference fit
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- No primer needed where local code permits
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
Specifications
| Size: | 32 oz. |
|---|---|
| Weight: | 2.26 lb. |
| Maximum Application Temperature °F: | 110ºF |
| Maximum Application Temperature °C: | 43ºC |
| Maximum Use Temperature °F: | 140ºF |
|---|---|
| Set Speed: | Very Fast Set |
| Brand: | Oatey |
| Product Type: | PVC Cement |
| Color: | Blue |
| Set Type: | Standard (40 - 110° F) |
| Material: | PVC |
More Specifications
Technical Resources (7)
More Downloads
Available in 10 variations
Frequently Asked Questions
What PVC cements allow for the longest set-up time, for multiple joint assemblies?
The regular body cement has the longest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the regular body cement has the quickest set up time before the joint is assembled because of the quick evaporation process. Any pipe sizes over 4” should be discussed with the technical department.
What cements allow for the shortest set-up time, for multiple joint assemblies?
The heavy duty cement has the shortest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the heavy duty cement has the slowest set up time before the joint is assembled because of the slow evaporation process. Any pipe sizes over 4” should be discussed with the technical department.