Is plastic hanger strap approved for supporting pipes?
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
< Supply Hangers (CTS)
Oatey® Copper Pipe Support Brackets
Key Features & Benefits
- Copper pipe support bracket
- Positions copper pipe to be soldered to bracket
- Made of copper-plated steel
- Features holes on 2 in. centers for 1/2 in. pipe and 4 in. centers for 3/4 in. and 1 in. copper piping
- 25 lb. load rating
Specifications
| Material: | Metal |
|---|---|
| Brand: | Oatey |
| Multi Size: | Yes |
| Nail: | No |
| Weight: | 0.4 lb. |
More Specifications
Frequently Asked Questions
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.