Is plastic hanger strap approved for supporting pipes?
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
< Supply Hangers (CTS)
Oatey® Copper Tube Size (CTS) Bell Hangers
Key Features & Benefits
- 1 in. copper-plated bell hanger
- Fits 1 in. pipes
- For light duty support of copper, CPVC and PEX pipes
- Use to mount copper tubing vertically or horizontally
- Made of copper-plated steel
- Enables the expansion and contraction of multiple pipes
- Provides a 13/16 in. stand-off from mounting surface
- Mounting screw has pierce point for use on metal studs and does not contact piping
- Includes (2) clamp screws and (1) 2-1/2 in. screw
Specifications
| Weight: | 0.092 lb. |
|---|---|
| Material: | Metal |
| Brand: | Oatey |
| Multi Size: | No |
| Nail: | Yes |
More Specifications
Available in 3 variations
Frequently Asked Questions
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.